FURNACES, MELTING, ALUMINUM
Stock Number: 3786
GASMAC GS-1000/ GAS
Age: 1996
Condition: EXCELLENT
| Specification | Description |
|---|
| MELTING CAPACITY | 2,200 LBS. |
| MELT RATE | 1,000 LBS. / HR |
| MELT CHAMBER | 1 |
| BATH CAPACITY | 2200 LBS. |
| HOLDING CHAMBER | 1 |
| WELL CAPACITY | 1500 LBS. |
| BATH TO MELT RATIO | 2 : 1 |
| LOW METAL LOSS - BETWEEN | 0.5% TO 1.5% |
| NATURAL GAS | 80 PSI COMPRESSED AIR |
| OVERALL DIMENSIONS | 10' W X 15' D X 15' H |
| ELECTRICS | 480 V / 3 PH / 60 HZ |
Equipped With:
DESIGNED FOR EFFICIENT ALUMINUM MELTING FOR FOUNDRIES OPERATION, DIECASTERS & EXTRUDERS
MELTING OCCURS ON THE MELTING RAMP LOCATED AT THE BOTTOM OF THE SHAFT
PRE-HEAT CYCLE - ELEMENATES THE POTENTIAL FOR EXPLOSION
COMBINATION MELTING & HOLDING DESIGN
FURNACE SHAFT IS CHARGED FROM OVERHEAD VIA CHARGING ELEVATOR SYSTEM
CHARGING SYSTEM IS FULLY AUTOMATIC
SHAFT MELTING DESIGN FOR THE MELTING PROCESS
EQUIPPED WITH HI-VELOCITY REVERB & RADIANT REVERB SYSTEMS
LOW EXHAUST GAS TEMPERATURES : BETWEEN 400 -700 DEGREES
DESIGN OF UNIT REQUIRES A MINIMUM OF PLANT FLOOR SPACE
CONTROLS PLC, FULLY AUTOMATIC
OVEN IS IN EXCELLENT CONDITION - LESS THAN 2000 HOURS OF USE - FURNACE WAS RECENTLY REMOVED FROM SERVICE IN EXCELLENT WORKING CONDITION - PLACED IN STORAGE
A PLUS MACHINERY INC.
911 SELLS DRIVE
HOOPESTON, IL 60942
Phone 217-615-7339
Fax 217-615-7339
sales@aplusmachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
